Because we have unbalanced hot and cold water supply pressures we ordered a low pressure tap from Wren, specifically informing our designer that we did not want a ceramic disc type. However, their Phoebe tap was the only low pressure one they had but when it turned up, guess what, it was a quarter turn ceramic disc type instead of the multi-tun cartridge type you would normally expect. It's not perfect, there is vertually no flow adjustment and it dribbles for ages after the tap is turned off.
The sink is another matter, hard as hell. I bought a new 34mm hole cutter for the tap hole and the sink virtually removed all the cutting teeth after only going through 6mm of sink thickness. There was some smoke towards the end but we got through.
No comments:
Post a Comment